Tag Archives: Mikrotik

RouterOS 3.14rc1

What’s new in 3.14rc1:

*) updated drivers, some of the changes:
synchronous cards should work in frame relay mode;
SIP connection tracking is more standards conformant;
valid TCP connection packets will not be marked as invalid;
*) mlppp – fixed problem when small packets could not be transmited
while more than 2 links were active;
*) bgp – fixed attribute flags checking;
*) fixed dhcp client – routes were not added back after lease expires
and then is acquired again;
*) fixed handling of multiple identical address-list entries
*) ospf could become unresponsive in some situations, fixed;
*) winbox – fixed problem: when moving multiple items at once,
correct order was not maintained;
*) fixed automatic fan control on RB600;
*) added ipv6 firewall address-list;
*) fixed some bugs in mesh protocol driver;
*) fetch tool – added basic HTTP authentication;
*) 6to4 tunnel – allow to specify remote address;

Click here to download iso file for i386.

Detect RB44GV on FreeBSD 7

New ethernet card we order arrived yesterday, its RB44GV from mikrotik. I just curious to see if its work with my FreeBSD box :-)

materibasuki# ifconfig -a
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:1a:92:b3:db:c2
inet 172.88.1.7 netmask 0xfffff000 broadcast 172.88.15.255
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:1a:92:b3:db:c3
media: Ethernet autoselect
status: no carrier
vge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:0c:42:1a:26:48
media: Ethernet autoselect (none)
status: no carrier
vge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:0c:42:1a:26:49
media: Ethernet autoselect (none)
status: no carrier
vge2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:0c:42:1a:26:4a
media: Ethernet autoselect (none)
status: no carrier
vge3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:0c:42:1a:26:4b
media: Ethernet autoselect (none)
status: no carrier
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0×8
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000

Another question from my friend. Is it real gigabit card?

Hmmm, I dunno but after few moment :

edp# cd /sys/i386/conf/
edp# ls
.cvsignore GENERIC MAC NOTES XBOX
DEFAULTS GENERIC.hints Makefile PAE

edp# cat GENERIC | grep vge
device vge # VIA VT612x gigabit Ethernet
edp#

Yes, its gigabit ethernet card 😉